Areas of activity

Liquid and powdered crystallizing waterproofing additives, fluidifiers, setting retarders and accelerators, air entrainers, accelerating products for shotcrete.

Additives for grinding and increasing the mechanical resistance of cement.

Particles of amorphous silicon dioxide ( 0.1-0.2 micrometers, about 100 times smaller than those in cement), to be used as an additive to improve strength, durability and water resistance.

Anti-adhesive release agents, to obtain an easy detachment of the concrete from the formworks, both steel and wooden. To be applied by spray or roller to the dry and free from contamination formworks.

Alkali-free setting accelerating additives for Spritz Beton: sprayed concretes and shotcretes, in the consolidation of rocks outdoors and/or in tunnels.

Two-component, high-solid, epoxy resin-based filler that can be used with quartz and/or inert fillers for the structural repair of cracks in concrete floors.

Surface, sprinkle-graining of industrial concrete floors by incorporation of mineral, premixed, basalt and corundum-based curing mixture.

Construction of fibre-reinforced concrete sub-floor screeds, with a thickness between 40 and 60 mm, of variable specific weight.

Polypropylene and steel reinforcement fibres for concrete conglomerates (industrial floors, underlay screeds, concrete and plasters, prefabrication and shotcrete).

Glues, cementitious powder adhesives (single and two-component) and fillers.

Architectural paving in washed stone, with low environmental impact, for squares, cycle paths, gardens and public or private parks, etc.

Epoxy and/or polyurethane resin flooring and coatings for civil, commercial and industrial construction.

Pigments, consolidants, anti-evaporation agents, latexes and additives for mortars, anti-shrinkage additive (SRA), viscosity additive for self-compacting concrete.

Planar regularizations of screeds (3 to 20 mm) with self-levelling cement mortar (leveller), prior to the installation of any coating.

Acrylic, epoxy, polyurethane and polyester resins for sealing, filling, fixing and structural anchoring.

Restoration of small thicknesses (from 5 mm to 40 mm) of concrete floors worn by time and traffic with very high performance fibre-reinforced mortars.

Hardening, dust-proof, chemical/mechanical, non-film-forming surface treatment of concrete floors, based on nano-technology lithium silicates.

Osmotic cementitious waterproofing, in thrust and counterthrust, of reinforced concrete and masonry structures: tanks and underground structures, water pipes, planters. Suitable for contact with potable water.

Hydro-expansive bentonite sheet waterproofing of underground rooms below groundwater level, natural ponds of landscape interest.

Waterproofing of terraces, balconies, and swimming pools, prior to the installation of tile or tile flooring, with plasto-elastic cementitious compounds.

Transparent, non-film waterproofing of tiled terraces, balconies, and stairs without demolishing existing flooring.

Elastomeric strips with high strength and deformability, for waterproofing expansion joints and connections, both underground and above ground.

Realizations of waterproofing even on cracked, not perfectly cured or still damp substrates, with anti-fracture desolarizing membrane.

Water-reactive and water-expanding polyurethane and acrylic resins for immediate stopping of water infiltration and consolidation of soils and rocks.

Waterproofing and protective liquid coatings for flat and pitched roofs, attics, balconies and walkable terraces, old bituminous coverings and weathered outdoor areas.

Bentonite, rubber and PVC hydroexpansive waterstops, caps and gaskets for formwork spacers with perfect hydraulic seal.

Traditional plasters, dehumidifying plasters, heat-insulating plasters, hydraulic lime-based mortars and fillers.

Paints and plasters based on lime putty, silicates, siloxanes and acrylics, for civil and industrial construction and for infrastructure works.

Removal and lasting elimination of mold, moss, algae and lichen, smog, graffiti and consolidating and water-repellent treatments from masonry and wooden surfaces.

Restoration, structural reinforcement with reinforced concrete and consolidation of buildings with plasters, injectable grouts and structural mortars.

Structural and anti-shrinkage, alkali-resistant, pultruded fiberglass and basalt reinforcement meshes.

Restoration of damp walls by creating chemical barriers to block capillary rise: low pressure, slow diffusion or in water-repellent gel cartridges.

Structural superfluid, anti-shrinkage cementitious grouts for masonry consolidation injections

Restorations, section ringing, seismic adjustments, with medium to thick sections (4-15 cm), on concrete and masonry structures, using fiber-reinforced self-leveling pourable mortar

Sealing and leveling of manholes and storm drains in street and parking lot contexts with quick-setting cement mortar for quick installation and reopening to traffic

Structural restoration of degraded concrete with thixotropic and castable, anti-shrinkage, fiber-reinforced, single- or two-component cement mortars

Construction, rehabilitation or adaptation of road joints, with ultra-high performance fiber-reinforced pourable mortar

Filling with pourable mortars the sheaths containing steel cables subjected to tension, to protect them from corrosion and transfer prestressing force to concrete

Self-levelling, anti-shrinkage, fiber-reinforced structural fluid cementitious mortars and grouts for anchoring, fastening and section ringing

Alkali-free setting accelerating additives for Spritz Beton: sprayed concretes and shotcretes, in the consolidation of rocks outdoors and/or in tunnels

Crystalline penetration cementitious mortars and grouts for restoring the original waterproofing of the structure by repairing cracks and fissures

Placing seismic isolators on the surface between the foundation and the structure to be protected, with mortar with high mechanical strengths at short curing times

Structural reconstruction and protective coatings of submerged hydraulic works by pumped or poured-in-place castings. Typical application thicknesses range from 50 mm to 120 mm.

Consolidation and structural filling of concrete and masonry artifacts by low-pressure injection of superfluid anti-shrinkage grouts or micromalts.

Osmotic waterproofing protective coatings, medium thickness (4 to 50 mm in several coats), with high adhesion to the substrate even in the presence of hydraulic counterthrust